Woodstock Shop Fox W1694 Instruction Manual - Fence Angle Stops

ADJUSTMENTS

-17-

There are three fence angle stops: 90˚, 45˚

inward, and 45˚ outward. The angle stops allow

the fence to be quickly and accurately posi-

tioned at various angles.

To adjust the 90˚ angle stop, do these steps:

1.

Using a machinist’s square, position the

fence 90˚ relative to the table surface

(

Figure 21).

2.

Position the limit plate in the forward slot

of the 90˚ slide stop.

3.

Loosen the jam nut on the 90˚ stop slide. 

4.

Using a flat-head screwdriver, adjust the

setscrew on the 90˚ stop slide until the peg

makes contact with the back of the fence

(

Figure 22).

5.

Retighten the jam nut loosened in 

step 3.

Figure 21. Setting the fence to 90˚.

Figure 22. Adjusting the 90˚ stop slide.

Fence Angle Stops