Woodstock Shop Fox W1694 Instruction Manual - Dust Port
ASSEMBLY
-14-
Figure 14. Installing the 90˚ stop slide.
Figure 15. Correctly installed filter bag
spring.
Figure 16. Filter bag secured to
the trash can.
To install the 90˚ stop slide, do these steps:
Slide the 90˚ stop slide under the limit plate as
shown in
Figure 14. Do not worry about its exact
position at this time. Further adjustment of the
90˚ stop slide will be discussed in the
Adjustments section.
The Model W1694 has a 2
1
⁄
2
" dust port with a
built-in suction impeller. The dust port can con-
nect to a standard 30 gallon trash can or a 30
gallon plastic trash bag.
To connect the dust port to a trash can, do
these steps:
1.
Slip the filter bag spring into the filter bag
arm (
Figure 15).
2.
Slide the filter bag arm over the dust port.
3.
Secure the filter bag over the rim of the
trash can with the filter bag band (
Figure
16).