Woodstock H0625 Instruction Manual - Introduction
-
2
-
INTRODUCTION
ABOUT YOUR NEW DRILL PRESS
This new Shop Fox
®
Oscillating Drill Press has been specially designed by Woodstock International, Inc.
to provide many years of trouble free service. Close attention to detail, ruggedly built parts and a rigid
quality control program assure safe and reliable operation.
The Model W1667 is a drill press and oscillating sander in one compact machine. It is capable of a wide
variety of drilling and sanding operations. A sanding spindle is included for use with drums ranging in size
from 1" to 2" diameter and 4
1
⁄
4
" long. Purchasing drums and sleeves will allow you to sand small or fine-
ly detailed pieces and with the oscillating feature, your abrasives will last longer and provide a better
finish. The tilting table allows surfaces to be sanded at many different angles. Included are table inserts
to give maximum support for the workpiece and a dust port to connect to your dust collection system.
The W1667 is packaged with a drill chuck, motor and paddle switch with removable safety key.
Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our
intent to make sure all the information necessary for safety, ease of assembly, practical use and dura-
bility of this product be included.
If you should have any comments regarding this manual, please feel free to contact us at:
Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227
WOODSTOCK SERVICE AND SUPPORT
We stand behind our machines! In the event that a defect is found, parts are missing or questions arise
about your machine, please contact Woodstock International Service and Support at 1-360-734-3482 or
at tech-support@woodstockint.com. Our knowledgeable staff will help you troubleshoot problems, send
out parts or arrange warranty returns.