Thermador C271 Service Manual - Dac Relay Board
DAC RELAY BOARD
(continued)
The relay board has 5 large pin headers. They are identified as P0, P1, P7,
P8, P18. These large pin headers carry current to specific components. The
pin numberts are identified on the schematic.
P0 large pin header has 8 pins and are identified as follows;
P0-1
Receives 120VACfrom l2.
P0-2
Sends 120VAC to upper oven latch motor
P0-3
Blank
P0-4
Sends 120VAC to lower oven latch motor
P0-5
Blank
P0-6
Not used
P0-7
Not used
P0-8
Blank
P1 large pin header has 8 pins and are identified as follows;
P1-1
Receives current from center tap of halogen light transformer.
P1-2
Sends current to lower oven halogen lights.
P1-3
Receives current from center tap of halogen light transformer.
P1-4
Sends current to uper oven halogen lights.
P1-5
Blank
P1-6
Sends current to both cooling motors
P1-7
Blank
P1-8
Sends current to both cooling motors.
Page 7