Tascam FW-1884 Notes - page 12
Digital Performer (Macintosh): FW-1884 Control Listings
12
TASCAM FW-1884
FW-1884 Control Listings
Modifier Keys
There are five primary modifier keys on the FW-1884.
They are used to provide additional functionality with
the FW-1884 control surface keys and knobs. They are
also used to send virtual key modifiers to DP in order
to access additional features which might normally
require a keyboard.
Surface Keys and Knobs
The following table lists the keys and knobs on the
FW-1884 and what they are used for. The normal
mode of operation (no modifier keys) is indicated with
a "-"in the Modifier column.
In some cases what has been silkscreened on the FW-
1884 differs from the functionality in DP. For those
controls the original silkscreened name appears in
parenthesis.
KEY
ACTION
NOTES
SHIFT
Key & Control Modifier
DP virtual SHIFT Key
CTRL
Key & Control Modifier
DP virtual CTRL Key
CMD
(no surface modifications)
DP virtual Command key
SET
Transport CTRL Modifier
Used when setting values (e.g. marker, punch in/out)
KEY/KNOB
MODIFIER
ACTION
FLIP
-
Toggles Encoder/Fader mapping
PAN
-
ENCODER knob adjusts Track pan
AUX 1-4
-
ENCODER knob adjusts Track Aux send level
(held down)
MUTE - toggles send mute
CONTROL PANEL
-
Opens the FW-1884 Control Panel
SAVE/F1
-
Save current project
REVERT/F2
-
N/A
ALL SAFE/F3
-
Disable Record on all channels
CLR SOLO/F4
-
Unsolo all tracks
SHIFT
Unmute all tracks
MARKER/F5
-
Drop Marker at current time ((Also dropped using SET and LOCATE >>)
LOOP/F6
-
Toggles Memory Cycle on/off
CUT
-
Cut the current selection
DELETE
-
Delete current selection
COPY
-
Copy current selection
PASTE
-
Paste previously copied selection
UNDO
Undo
SHIFT
Redo