SERO BWA-SS-10 User Manual - page 8
Manual is about: GROUND SOURCE
of
29
8
Symbols
For you to know at a glance the actual operating mode of the heat pump, each of the following symbols
will be shown in the lower part of the display depending on which part of the unit is working:
1. The heat pump is running.
2. The auxiliary heater is activated.
3. There is a room heating demand.
4. Warm water is being produced.
5. Indicates the status of warm water production. If the symbol is empty, warm water temperature is
under the setting temperature. It does not mean that there is no water in the water tank.
The tank is always full.
6. If the symbol is full, warm water temperature reached to the setting temperature.