Summary of ST-5 Series
Page 1
St-5xx u light meter v instruction manual r rohs complint.
Page 3: U Light Meter
U light meter v instruction manual.
Page 4: For Sensor
Storage for sensor uv sensor is with extremely precise structure. Once don’t use it , be sure it in the dry environment. Manual for future reference. Improper use endangers the health of third parties ! It may also result in damage to the equipment or other material damage. Danger when using the equ...
Page 5: 1. General Information
Table content 1. General information 2. Features 3. Safety symbols 4. Specification 6. Operations of instrument 5-1 control panel 5-2 lcd display 1 1 2 4 5 6 3.
Page 6
1 1. General infor mation thank you for purchasing the ultraviolet meter. Read through this instruction manual before operating the unit. Please also store and retain this instruction manual for future reference. Socket of tripod mounting. High and low measurements range in a unit 2 2 mw/cm or μw / ...
Page 7
2 3. Safety symbols indicates ce conformity the device may not be disposed with the trash. It promotes the re-use recycling and other forms of recovery of us ed materials and components, and improves the environmental performance of all operators ( manufacturers, traders a nd treatment facilities) i...
Page 8
4. Specification over range indication ' -hi- ' zero adjust auto record sample time display memory operation temperature 0~50℃(32 ~122℉),10~90％rh battery type dimensions accessory weight ） 140 x 49 x 29 mm（ 51x 1 .93 x 1.14i nch . 5 approx. 90g without battery and detector. 9v battery , uv sensor pr...
Page 9
4 5-1 control panel 1.Lcd display 5.Select button 4.Power on/off and hold button 2.Memory button 3.Mode button 1. 2. 3. 4. 5..
Page 10
5 5-2 lcd display 1. Main functions 2. Primary reading 3. Data log 4. Auto mode 5. Memory review 6. Data hold 7. Record 8. Max/min/avg 9. Secondary reading 10.Time unit 11.Unit 12.Uv type 13.Low battery 11.
Page 11: Power On
6 6. Operations of instr ument power on press button and hold for 2 seconds. Release the button after power on. All symbols of lcd will appear for 1 second. Power off press button and hold for 2 seconds. All symbols of lcd will appear and shut down after releasing button. Measurement value the prima...
Page 12: Main Function
7 main function press mode button to choose the main funct i o ns (max/min/avg has several extended programs as indicated in the diagram, please r ead t he following descriptions to know how to press s, or m buttons to move to next level!) main function diagram max min avg zero type unit time mode /...
Page 13: Data Hold
8 max/min/avg measuring function there are 4 modes of the measuring function. Press s button to change the mode of measuring: none → max → min → avg. Data hold press button, the value a t secondary display will be held and the lcd wi ll sh ow hold symbol. To cancel hold mode, p ress the button again...
Page 14: Data Store
9 data store normal press m button to store the current measurement displayed at primary display. The flashing data(01~20) icon becomes steady for 2 seconds, and moves to next storage location. Auto if automatically recording is required, press m button and hold for 2 seconds. The lcd will show auto...
Page 15: Zero Adjust
10 zero adjust cover the sensor and press s button to zero adjust. The secondary display will display adjust value*. Press s button again and hold for 1 second to clear the adjust value. *when the adjust value is over the range. The secondary display will display “-err”. Please follow the zero adjus...
Page 16: Time Function
11 time function press s button to set the interval time of auto recording. This function allows to set 9 different time intervals by pressing s button. The 9 time intervals are: 1, 2, 5, 10, 30 second or 1, 3, 5, 10 minutes. Time.
Page 17: Maintenance
12 maintenance clean the housing: use soap and water on a damp sponge or soft cloth. Care should be taken to prevent any liquids or moisture to get inside the unit. When the battery is low, the battery symbol will display..
Page 18: Uvab Sensor
Specification 280 320 360 380 400 420 uvab sensor sensor designation uvab spectrum range 280~400 calibration point 365nm temperature range accuracy( °c) units/multi-ranges nm 0° ~50°c 23±5 ±4% ±1 digit surface sensor pa05-0uvab513-01 low illumination high illumination 2 2 w/ c m w/ c m 0.01 m ~40.00...
Page 19: Extendable Wand
Extendable wand 2 3 4 upper case self-tapping screws lower case senser 1 2 3 4 x5 x1 x1 x1 (a) note: recommend not to assemble and disassemble too many time to avoid the wear of screw holes . (b) 1.
Page 20
St 512 . Version-01 07/sep. 3f, no.122, sec.1, sanmin road, ban-ciao, taipei 220, taiwan, r.O.C. Tel:886-2-2956-8198 fax:886-2-2956-7662 http://www.Sentrytek.Com.Tw pa05-0000512-01.