Sentry RP-IP5304IR-2MP Quick Start Installer Manual - page 10
Configuring an RP-IP Camera’s Motion Detection Settings
Please call Sentry Security Systems Inc. at 1.866.736.8796 for Technical Support
To configure an RP-IP camera to detect motion:
1. Log into the camera settings by entering the IP Address of your camera into the URL field in
Internet Explorer.
2. Click on Alarm Settings, then Motion
Detection in the left hand navigation
bar.
3. Check the box next to Motion under
Detection Setting, then select the
sensitivity level from the drop down
menu (5 being the highest).
4. Check the box underneath Time 1 and then enter 0:0 - 23:59 (by default)
5. Click Area Set under Detection Area, followed by the All button to set motion detection for the
entire camera view, or click and drag a square in the image box to set the desired area.
6. Remember to click Save at the bottom of the page to save any changes you may have made.