Sentry NC-GSMDE263 System Installation, Setting And Operation Manual - Operation
8
OPERATION
z Before operation: Please make sure the GSM Intercom Door / Gate Entry Systemis installed
correctly. Please also study all key functions before use.
Power ON/OFF
Turn the power ON
Insert the plug of the power adapter into the DC power jack of door unit and the other end into an
AC power outlet.
When the power is on, the system will emit a “beep” sound, show “GSM Intercom Door / Gate
Entry System” and software version on screen, “Search Network” for few second, and then show
“Welcome!"
Turn the power OFF
Turn off the door unit by unplugging the power adapter from the AC power outlet.
Manager Mode and Functions
Note: The unit will be time out after 5 seconds if no buttons are pressed.
Press the MENU button, and the system will show "Hello! Manager!" "Password:______"
After entering default password "1234", press the CALL button to show the button functions as
below:
"CALL: Select/Save"
"C: Delete"
"MENU: Exit/Abort"
"▲/▼: Move cursor"
Press any button or after 6 seconds, it will show:
GSM Door Phone
Version v1.18
Search Network
Hello! Manager!
Password:
_ _ _ _
Manager
Subscriber
Welcome!