Sentry NC-GSMDE263 System Installation, Setting And Operation Manual - page 12
11
Change Speaker Volume
Manager Setting Æ GSM Setting Æ Speaker Volume
Note: There are 9 levels of speaker volume level from left (softest) to right (loudest). If the GSM Intercom Door / Gate
Entry System is installed in an outdoor environment, please set the speaker level to 5 or 6. Avoid setting the speaker volume
to the maximum level as it may cause feedback.
While at the Manager menu option, press the CALL button
Select GSM Setting and press the CALL button
Select Speaker Volume press the CALL button
Press the
▲/▼ (
UP/DOWN) buttons to adjust volume.
Press the MENU button to return to the previous options screen and the last setting will be saved
automatically.
Change Speaker Volume During conversation
At any time during the conversation, if the caller needs to increase the speaker volume, the caller can
press the
▲/▼ (
UP/DOWN) buttons to adjust speaker volume. The screen will show the current
speaker volume and the microphone will be mute for 1.5 seconds, then the conversation will be
continued.
Door Setting
To Activate / To Deactivate Open Door lock by Password
Manager Setting Æ Door Setting Æ Open by Password
Note: If your GSM Intercom Door / Gate Entry System is connected with an electric door strike, you can activate the
password feature to open the door lock with a password. The default password is “1234”.
While at the Manager menu option, press the CALL button
Select Door Setting and press the CALL button
Select Open by Password and press the CALL button
Press the CALL button to toggle between “Enabled” and “Disabled”
Press the MENU button to return to the previous options screen and the last setting will be saved.