Sentry GSM-DE3100 User Manual - page 5
5
PACKAGE CONTENTS
Panel – Front
Panel – Rear
with Plastic Back Cover
Stainless Steel Surface Mount
Panel Housing
GSM External Antenna
(9.8ft/3m lead)
with Bracket
3M Sticker + One (1)
Screw & Wall Anchor
for Antenna Bracket
Power Adapter
12V DC 1.5A
Two (2) Security Screws &
Locking Washer
Allen Wrench for Security
Screws
User Manual
Quick Setup Guide
For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No Returns will be accepted
if any component is missing / damaged.
INTRODUCTION
The GSM Door / Gate Intercom Entry Systemis an intercom access system installed at the entrance of a door or gate. It is an ideal product replacing
the traditional door phone. It allows up to three (3) Admins (1 Power Admin and 2 Admins) and up to one hundred (100) Users access to entrance
with an option to provide remote access for visitors who use the system to call the homeowner or manager. The system has a default talk time of
55 seconds with a maximum talk time of 999 seconcds.
There are three options of remote access into the system.
Option 1: The visitor can push the call button on the system. Once the Admin receives the call, they can unlock the gate from a remote
location by simply pressing a (star) command on their cell phone or ignoring the call.
Option 2: The Admin can call into the system and remotely dial a command ( 33 5678
#
‐‐ default) to momentarily release the lock.
Option 3: Registered users (up to 100) can dial into the system, and if recognized, will allow automatic unlock through Caller ID
recognition.
This system gives the opportunity not only to know who is waiting at the entrance from a remote location but also to control the access point. Use
of this system at your company or house does not require any special installation or wiring. Simply install this system and connect the door latch
and power supply.
ROLE ASSIGNMENT
The system has the ability to store 3 Admin accounts (1 Power Admin + 2 Admins) and 100 User accounts. Registered Admins have the ability to call
into the system and enter dial codes or SMS codes to access functions. Separate roles can be assigned to an Admin. Users are allowed to make calls
into the system and are allowed entry into door/gate by dialing in. Users are recognized by Caller ID and if Caller ID is not recognized, call is ignored.
When a registered User dials into the system they are limited to opening the door/gate only.
THE DIFFERENT ROLES OF ADMIN & POWER ADMIN
The system is set to call Admin 11 first if the call button is pushed. After 18 seconds (default) and there is no answer, the phone call is
disconnected and diverted to dial Admin 12. If no answer, then system diverts to dial Admin 13. Depending on service provider, Ring Divert Time
1)
2)
3)
4)
5)
6)
7)
8)
9)