Sentry GSM-DE3100 User Manual - page 13
13
To check Minutes/Balance Status
on SIM Card, enter:
23
#
Feature may not work in United States.
To Add Check Balance Code, enter:
78 xxxxxxx
#
Enter code for SMS check balance from service provider (related to check minutes/balance status on SIM card).
*Must change to Check Balance Code of Service Provider.
For a chart of the important programming key codes, see page 14.
FACTORY DEFAULT RESET
If performing a “reset to factory default” is necessary, make sure to record all settings and phone numbers of admin and users. Once hard reset is
performed, all phone numbers and settings are erased and must be reprogrammed into the system again.
To Reset, enter:
12 1234
#
999
#
Enlarged Screen Capture Pictures from front page of Quick Setup Guide:
ITEM 9: List all Numbers Stored in the System.
ITEM 10: Check Lock (Relay) Status.
O = admin / I = user / E= end
Relay on = unlocked / off = locked
Entry OK confirmed.
Entry Failure – Forgot
#
Sign
ITEM 18: Change Unlock System Code. Change from factory default to
0
.
FOR REFERENCE ONLY
Striek Lock
Mag Lock
Typical Lock Power Consumption
12V DC @ 250mA / 24V DC @ 150mA
300 lbs: 12V DC @ 420mA / 24V DC @ 210mA
Please refer to all power consumption
600 lbs: 12V DC @ 500mA / 24V DC @ 250mA
details in the lock manual for lock being installed.
1200 lbs: 12V DC @ 500mA / 24V DC @ 250mA