Sentry GSM-DE3100 User Manual - page 11
11
To add User 20, enter:
12 1234
#
72 20 1phonenumber
#
To add User 100, enter:
12 1234
#
72 100 1phonenumber
#
To delete a User, enter:
12 1234
#
73 usernumber 1phonenumber
#
To delete all Users, enter:
12 1234
#
73
#
Example 3:An Admin wants to program User 2 into the system. His phone number is 999‐888‐4321.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Enter Program
Mode
Admin Passcode
End Passcode
Function Code
User Number
(0‐100)
Country Code + Telephone Number
(11 digits ‐‐ including country code 1 &
phone number with area code)
End
12
1234
#
72
2
1 999 888 4321
#
CHANGING PASSCODES & CODES
To change Passcode
from 1234 to your own, enter:
12 1234
#
01
#
= new 4 digit passcode
To change Relay Hold & Release Code
from 5678 to your own, enter:
12 1234
#
02
#
= new 4 digit passcode
To change Sound Monitoring Code
from 1212 to your own, enter:
12 1234
#
03
#
= new 4 digit passcode
To change Unlock System Code, enter:
12 1234
#
61 x
#
Changes the door unlock symbol code to open door from default ( ) to another digit/symbol.
To change Hold System Unlock Code, enter:
12 1234
#
63 x
#
Changes the hold door unlock code from default (
#
) to another digit/symbol.
To change Lock System Code, enter:
12 1234
#
64 x
#
Changes the lock door system code from default (1) to another digit.
To change International Country Code, enter:
12 1234
#
71 countrycode
#
The country code can be 1‐3 digits. The default is set to country code 1 for USA.
To change Call into Type, enter:
12 1234
#
65 x
#
When Admin calls into the system, it goes into the default programming mode (1). An admin can change the system’s call in mode from
programming mode to talk time mode (so no programming can be done). The default is set to 1.
x = 1 for programming mode or 2 for talk time.
SOUND MONITORING MODE
Admins have an option to listen to what is happening outside the door/gate while the microphone is disabled. The default Sound Monitoring Code
is 1212.You can still control the door/gate lock mechanism when you are under sound monitoring mode.
1) Use your cell phone to dial into the system by entering the phone number of the SIM Card installed in the system. The system will then
verify your phone number with the predefined numbers. You will hear a long tone when the door system answers the call. Optionally you
can SMS the system with same key code and the system will call back Power Admin.
2) To enter Sound Monitoring Mode –
Listen Only, enter:
13 1212
#
Speaker is off under the Sound Monitoring Mode. To enable microphone for 2‐way communication, enter command key code 35
#
.