Sentinel EVC-1 Instruction Manual

Page of 4

Download

Bookmark us

Troubleshooting & Specs EVC-1

Amps / Volts requirements

15 amps @ 120 volts

Min / Max operating temperature

32 to 120° F

Temperature Accuracy

+/- 2’ F

Min / Max Humidity

0-99% RH

Humidity Accuracy

+/- 7% rH

CO2 Mode

Daytime

Weight / Dimensions

7 lbs / 8” x 6.5” x 3.1”

Thermostat type

Remote bulb 30”

Life Expectancy

> 10 years

Humidity Mode

Humidify or Dehumidify

Temperature Mode

Cooling

Sentinel products are distributed by:

GPS / Global Product Solutions LLC.

www.growgps.com

All Sentinel Timers and

controllers offer a

3-year warranty.

Ask your retailer for

details.

Instruction Manual

EVC-1

Environmental Controller

Page 1
Troubleshooting & specs evc-1 amps / volts requirements 15 amps @ 120 volts min / max operating temperature 32 to 120° f temperature accuracy +/- 2’ f min / max humidity 0-99% rh humidity accuracy +/- 7% rh co2 mode daytime weight / dimensions 7 lbs / 8” x 6.5” x 3.1” thermostat type remote bulb 30”...
Page 2
Temperature… humidity & co2. What do they have in common? They are all environmental conditions inside a growing area that need to be controlled for successful gardening. The evc-1 environmental controller controls all that and more. If you want a simple-to-use and reliable controller without spendi...
Page 3
Connection examples or for indoor growing, cooling devices such as ventilation fans or air-conditioners connect to the temp-exhaust device receptacle heaters for cooler climate greenhouses can be connected to the night device receptacle. Or connect your 120 volt compressed co2 solenoid / regulator a...
Page 4
Installing the evc-1 1) locate a suitable location. First secure the provided bracket to the wall. Next snap the controller into place and tighten the (2) thumb-screw.S on the top & bottom. 2) the unit requires a 120 volt, 15-amp power supply. Plug the power cable into a standard nema 5-15 wall outl...