RMA SuperLite 4 User Manual - Adjustments
www.discountscooters.co.uk
5
08000 96 12 96
ADJUSTMENTS
Tiller Angle Adjustment
On the left hand side at the base of
the tiller is a red lever. Push the lever
in to release the pin and select the
required tiller angle. Refit the pin
into one of the five location holes.
(Fig. 2)
Seat Removal
Fold down the back of the seat.
Unscrew the upper hand lever under
the seat and remove from the seat
post.
Seat Height Adjustment
Remove seat as described above.
Slacken the lower hand lever. The
seat height can be adjusted to
different settings by inserting the
steel locking pin into the required
hole (Fig. 3). Re-tighten lower hand
lever and replace the seat.
Armrest angle adjustment (Fig. 4)
Flip up the armrests to allow access
to the adjustment screw and lock nut,
unscrew the lock nut and screw the
bolt in or out to increase or decrease
the angle. Re-tighten the lock-nut.
Your scooter is despatched from the
factory with the armrests set parallel
to the floor.