RMA RouterBoard 751 series User Manual

Summary of RouterBoard 751 series

  • Page 1

    Routerboard 751 series user's manual copyright and warranty information copyright and trademarks. Copyright mikrotikls sia. This manual contains information protected by copyright law. No part of it may be reproduced or transmitted in any form without prior written permission from the copyright hold...

  • Page 2

    2 user's manual ............................................................................................................................................................... 1 copyright and warranty information ..........................................................................................

  • Page 3: Specifications

    Routerboard 751 series user's manual 3 system board view and layout you can download the board dimensions and case design files (pdf and dxf) from www.Routerboard.Com specifications routerboard 751u-2hnd / routerboard 751g-2hnd cpu ar7241 400mhz memory 32mb ddr sdram onboard boot loader routerboot d...

  • Page 4: Hardware Guide

    4 routeros routeros v5, level4 license wireless specifications wireless integrated wireless 2.4ghz 802.11b/g/n 2x2 mimo antenna 2x2 mimo pif antennas, max gain 2.5dbi, external mmcx option rx sensitivity 802.11g: -96dbm (6mbit/s) to -81dbm (54mbit/s) 802.11n: –96 dbm (mcs0) to –78 dbm (mcs7) tx powe...

  • Page 5

    Routerboard 751 series user's manual 5 booting options routeros is the operating system of all routerboard routers. Please see detailed configuration guide here http://wiki.Mikrotik.Com/wiki/category:manual initial configuration includes the following: wirelesss ap with ssid „mikrotik” has been enab...

  • Page 6: Routerboot

    6 buttons and jumpers routeros reset jumper hole (on the bottom of case) – resets routeros software to defaults. Must short circuit the metallic sides of the hole with a screwdriver and boot the device. Hold screwdriver in place until routeros configuration is cleared. Routerboot reset button (res, ...

  • Page 7: Routeros Functions

    Routerboard 751 series user's manual 7 the primary boot loader has the default settings, which can not be changed. It is also not possible to upgrade it. Routeros functions the default os of routerboard devices is routeros, when the routerboard.Npk package is installed, routeros can configure some r...

  • Page 8

    8 button index res software reset 1 button. (see ” buttons and jumpers ”) reset (unlabeled) software reset 2 jumper hole. Resets routeros settings (see „ buttons and jumpers ”) ethernet cables rj45 pin color function (100mbit) function (1gbit) rj45 pin for straight cable (mdi, eia/tia568a) rj45 pin ...