Riva RC6602HD-5311 Quick Installation Manual - page 4
4
www.rivatech.de
Step3. Adjust the lens focus
1) Check the video output on a Web browser. (Refer to Step 5 for more details.)
2) To adjust the zoom, focus and etc., open the bottom bracket by using driver.
Step4. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of
the device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
IPN6602HD-5311
IPN6602HD-5215
TELE
WIDE
NEAR
FAR
AF
NT/PAL
F/D
VOUT
VOUT
F/D
NT/PAL
TELE
WIDE
FAR
NEAR
TELE/WIDE: Zoom
FAR/NEAR: Focus
A/F: Auto Focus
NT/PAL: NTSC/PAL
IPN6602HD-5311
IPN6602HD-5215
TELE
WIDE
NEAR
FAR
AF
NT/PAL
RESET
VOUT
VOUT
NT/PAL
TELE
WIDE
FAR
NEAR
RESET
*Video out uses only for installation and works for 3
minutes when PAL/NTSC button is pushed.
* The default is no video output, but whenever you
push the button the video output status is changed and
repeated as follow:
No video output -> PAL-> NTSC