Raritan Dominion KX III Quick Setup Manual - page 7
Dominion KX III Quick Setup Guide
7
QSG-DKX3-v3.5.0-0J-E 255-62-0003-00-RoHS
•
Synchronize the date and time with a Network Time
Protocol (NTP) server.
1. Choose Device Settings > Date/Time to open the
Date/Time Settings page.
2. Choose your time zone from the Time Zone drop-down
list.
3. Adjust for daylight savings time by checking the "Adjust
for daylight savings time" checkbox.
4. Choose the method to use to set the date and time:
User Specified Time - use this option to input the date
and time manually. For the User Specified Time option,
enter the date and time. For the time, use the hh:mm
format (using a 24-hour clock).
Synchronize with NTP Server - use this option to
synchronize the date and time with the Network Time
Protocol (NTP) Server.
For the Synchronize with NTP Server option:
Enter the IP address of the Primary Time server.
Enter the IP address of the Secondary Time server.
Optional
Note: If DHCP is selected for the Network Settings on the
Network page, the NTP server IP address is
automatically retrieved from the DHCP server by default.
Manually enter the NTP server IP address by selecting
the Override DHCP checkbox.
5. Click OK.
QS Rule
Step 5: Launching the KX III Remote Console
1. Launch a supported web browser, and enter the IP
address assigned to the KX III. A default client is launched
based on your pc and browser settings. See the online
help for details about clients.
2. Enter your username and password, then click Login.
3. Accept the user agreement (if applicable).
4. If security warnings appear, click to accept.
Tip: If you have a Dominion KX III User Station, you can use it
to remotely access the KX III target servers. See
Dominion KX
III User Station
(on page 9).
Access and Control Target Servers Remotely
The KX III Port Access page provides a list of all KX III ports.
The page also lists all of the target servers connected to the
KX III along with their status and availability.
Access a Target Server from the KX III
1. On the KX III Port Access page, click the Port Name of the
target you want to access. The Port Action Menu is
displayed.
2. Choose Connect from the Port Action menu.
A KVM window opens with a connection to the target.
Switch between Target Servers
1
While already using a target server, access the KX
III Port Access page.
2
Click the port name of the target you want to
access. The Port Action menu appears.
3
Choose Switch From. The new target server you
selected is displayed.