Northern NTH-IP3B Quick Operation Manual - Steps:
Other manuals for NTH-IP3B:
User Manual, User Manual
of
23
Network Bullet Camera·Quick Operation Guide
10
•
Make sure that there are no reflective surfaces too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
•
The foam ring around the lens must be seated flush against the
inner surface of the front glass to isolate the lens from the IR LEDS.
Steps:
1.
Attach the drill template on the wall.
Figure 2-1
Attach the template
2.
Secure the camera to the ceiling with the supplied expansion
screws.
Screw Hole
Template
Installation & Quick Setup Guide