Northern NTH-IP3B Quick Operation Manual - Installation
Network Bullet Camera·Quick Opera on Guide
9
2
Installation
Before you start:
•
Make sure the device in the package is in good condi on and all
the assembly parts are included.
•
Make sure all the related equipment is powered off during the
installa on.
•
Check the specifica on of the products for the installa on
environment.
•
Make sure the power supply matches with your required
voltage to avoid damage.
•
If the product does not func on properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
•
Make sure that the wall is strong enough to withstand three mes
the weight of the camera.
For cameras with IR, you are required to pay a en on to
the following precau ons to prevent IR reflec on:
•
Dust or grease on the front glass will cause IR refle on.
Please do not remove the cover film un l the installa on
is finished. If there is dust or grease on the front glass, clean
the front glass with clean soft cloth and isopropyl alcohol.
Installation & Quick Setup Guide