Lathem FR700 User Manual - ↑

P A Y C L O C K   &   F A C E I N   U S E R ’ S   G U I D E  

80

•

Using the index/numeric keys enter a name. This should be 

the same as the first name you will enter into the PayClock 

software. After pressing the desired index/numeric key, use 

the 

↑

/

↓

 to move through the available letters. To change to 

caps, press the index/numeric key with the desired letter and 

press the 

ESC

 key. The letter group will change to caps. 

After entering the name, press the 

OK

 key. 

•

With the employee standing at the ready, select the 

verification method to use for the employee. 

Verification Methods

Typically for a normal employee you would select Face recognition, 

for a temporary employee select Card recognition, for higher security 

select either Pin and Face or Card and Face recognition. 

Face / PIN & Face Verification Method

When enrolling employee faces, take the following into 

consideration: 

Eye Glasses

 - It is recommended for the employee to enroll with the 

eye glasses on for half the process, then remove the eye glasses and 

complete the registration. 

Hair Style

 - If the employee has a hair style that has their hair 

covering or blocking their eyes, move the hair away from the eyes 

during the registration process. 

•

Position the employee so the face is in the middle of the two 

cameras with 9 to 25 inches between the face and the 

terminal. 

•

The image collecting screen will display, start the face 

recognition enrollment. 

•

Perform 2 small head circles to the right. 

•

Perform 2 small head circles to the left. 

•

Move the face closer to the terminal until the white dashed 

square appears.