Lathem FR700 User Manual - Set Up An Administrator
P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
11
Set up an Administrator
After setting up the network communications you will need to set up
at least one administrator.
Note:
You can have up to 5
administrators.
•
Press the
MENU
key, the Functions Menu will open.
•
Press
1
, the Set Admin menu will open.
•
From the Set Admin menu, press
1 - Admin 1
.
•
The image collecting screen will display.
•
Position the face in the middle of the two cameras with 9 to
25 inches between the face and the terminal.
•
The image collecting screen will start the face recognition
enrollment.
•
Perform 2 small head circles to the right.
•
Perform 2 small head circles to the left.
•
Move the face closer to the terminal until the white dashed
square appears.
•
Move the face back until there is 9 to 25 inches between the
face and the terminal.
•
Turn the head fully to the right.
•
Turn the head fully to the left.
•
Raise the head up slightly.
•
Lower the head down slightly.
•
Move the face back from the terminal until there is 9 to 25
inches between the face and the terminal (if adjust position
message is still displaying).
•
Resume small head circles to the right (if adjust position
message is still displaying).
•
The progress bar at the bottom of the screen will display the
process of the imaging.