Kawasaki VERSYS - Owner's Manual - page 122
of
176
120
MAINTENANCE AND ADJUSTMENT
•
If the drive chain is too tight or too
loose, adjust it so that the chain slack
will be within the standard value.
Drive Chain Slack
Standard
25
∼
35 mm (1.0
∼
1.4 in.)
Chain Slack Adjustment
•
Remove the cotter pin, and loosen
the rear axle nut.
•
Loosen the left and right chain ad-
juster locknuts.
A. Rear Axle Nut
B. Cotter Pin
C. Adjuster
D. Locknut
•
If the chain is too loose, turn out the
left and right chain adjusters evenly.