Kawasaki KX250F - Owner's Manual - page 128
Other manuals for KX250F -:
Brochure, Service Manual, Service Manual, Service Manual, Service Manual, Service Manual, Service Manual, Instruction Manual
Manual is about: Motorcycle
of
201
127
j
NOTICE
When tightening the locknut, the threads of
the axle holder do not touch the push rod.
If the push rod is scratched, it is possible to
the damage in the cylinder unit.
A. Locknut
B. Wrench
C. Left Front Fork Adjuster Assembly
•
Apply a non-permanent locking agent to the
threads of the adjuster assembly and tighten the
left front fork adjuster assembly into the front fork.
Tightening Torque
Left Front Fork Adjuster Assembly:
69 N·m (7.0 kgf·m, 51 ft·lb)
A. Axle Holder Part
B. Left Front Fork Adjuster Assembly
•
Using the top plug wrench (special tool: 57001
-1645), remove the left front fork cylinder unit from
the outer tube and slowly slide down the outer
tube.