Jcb JCB-CD18Li Safety And Operating Manual - Operation

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

After recharge, slide it back into 

your tool. A simple push with slight 

pressure will be sufficient.

C) auxILIaRy HanDLE 

Slide the handle onto the drill 

and rotate to the desired working 

position. To clamp the auxiliary 

handle, rotate the handgrip 

clockwise. To loosen it, rotate the 

handgrip anti-clockwise. Always use 

the handle during operation.

OPERatIOn

1. On / Off SwItCH (See 

2

)

Depress the On/Off switch (5) to 

start and release it to stop your 

drill. The on/off switch is fitted with 

a brake function which stops your 

chuck immediately when you quickly 

release the switch.

It is also a variable speed switch 

that delivers higher speed and 

torque with increased trigger 

pressure. Speed is controlled by the 

amount of switch trigger pression. 

warning: Do not operate for 

long periods at low speed 

because excess heat will be 

produced internally.

2. SwItCH LOCK

The switch trigger can be locked 

in the OFF position. This helps to 

reduce the possibility of accidental 

starting when not in use. To lock 

the switch trigger, place the rotation 

5

2