Intermec CK61 Installation Instructions Manual - Equipment
14
Vehicle Dock Kit Installation Instructions
For installation in a system that includes a printer refer the
following wiring diagram.
Installing the Vehicle Dock and Printer
1
Install a printer-specific “Y” power cable to supply power to
both the vehicle dock and to the printer.
2
Connect one end of this cable to the printer and the other end
to the vehicle dock.
3
Connect the keyed rectangular connector on the printer-
specific gray battery cable to the “Y” power cable.
You must also connect the printer-specific data cable between the
vehicle dock and the printer. This cable allows the mobile
computer to communicate with the printer. Plug the appropriate
end of this cable into the vehicle dock and the other end into the
printer.
Installing the Vehicle Dock With Other
Equipment
Have your installation team do your installation. They are
experienced with a wide variety of installations. For example, you
could be installing the vehicle dock with an additional in cab
radio or satellite tracking device. You would need to modify the
black dock cable to connect into a vehicle fuse block that the
installation team would install.
Cables for Vehicle Dock, Printer, and Vehicle Battery
Description
Part Number
Quantity
“Y” power cable
226-325-101
1
Battery cable (gray)
236-106-005
1
Battery
-
+
Vehicle dock
Printer
“Y” power cable
Remote data cable
Battery cable