Interlogix TVB-5301 Installation Manual - page 56
Other manuals for TVB-5301:
Configuration Manual
Manual is about: TruVision Series 3 FW3.1
of
68
50
Installation Guide
Lens
assembly
Trim ring
3. There two options for routing the cables.
Route the cables directly out of the bottom of the camera
or through the side access point shown below. Remove
one of the knockouts (using pliers) on the edge of the trim
ring to provide cable access.
Side access point
4. Connect the corresponding power and network cables.
5. Attach the camera to the mounting surface using the
supplied hardware.