Interlogix TVB-5301 Installation Manual - page 53
Other manuals for TVB-5301:
Configuration Manual
Manual is about: TruVision Series 3 FW3.1
of
68
Installation Guide
47
5. Loosen the locking screw, located near the lens
assembly using the Torx wrench. Align the Lens
Adjustment Tool with the two small holes located on the
camera assembly. Rotate (pan) the camera assembly
using the Lens Adjustment Tool until the lens is
positioned in the correct location. The tool is also used to
adjust the tilt angle.
Locking screw