Interlogix TVB-5301 Configuration Manual - Overlay Text
34
TruVision Series 3 IP Camera FW3.1 Configuration Manual
4. Check the
Display Week
box (3) to include the day of the week in the on-
screen display.
5. In the
Camera Name
box (4), enter the camera name.
6. Select the time and date formats from the
Time format
and
Date format
list
boxes (5).
7. Select a display mode for the camera from the
Display Mode
list box (6).
Display modes include:
•
Not transparent & Not Flashing
. The image is behind the text. This is
default.
•
Not transparent & Flashing
. The image is behind the text. The text
flashes on and off.
•
Transparent & Not Flashing
. The image appears through the text.
•
Transparent & Flashing
. The image appears through the text. The text
flashes on and off.
8. Select the desired OSD size (7).
9. Select the desired font color (8).
10. Click
Save
to save changes.
Note:
1. If you set the display mode as transparent, the text varies according the
background. With some backgrounds, the text may be not easily readable.
2. When you enable motion detection, it is recommended not to select the
flashing display option as overlay text may trigger a motion alarm.
Overlay text
You can add up to four lines of text on screen. This option can be used, for
example, to display emergency contact details. Each text line can be positioned
anywhere on screen. See Figure 7 below.