Interlogix TVB-5301 Configuration Manual - page 32
30
TruVision Series 3 IP Camera FW3.1 Configuration Manual
Parameter
Description
sharpness), Exposure (Exposure Time and gain), Backlight, White
Balance and Image Enhancement settings for day mode only.
Night: Configure the Image Adjustment (Brightness, Contrast and
sharpness), Exposure (Exposure Time and gain), Backlight, White
Balance and Image Enhancement settings only.
Custom 24h settings This is used when the camera is in an outdoor situation where the
day/night change is defined by the amount of daylight or a trigger via
an alarm input. Consequently no schedule needs to be used for the
D/N switch.
The camera will have specific image settings for day and night
situations.
There are three tabs to configure the day/night settings:
Common: Both day and night mode settings are identical for Image
Adjustment (Saturation), Exposure (Iris Mode), Day/Night Switch,
Video Adjustment, and Other.
Day: Configure the Image Adjustment (Brightness, Contrast and
sharpness), Exposure (Exposure Time and gain), Backlight, White
Balance and Image Enhancement settings for day mode only.
Night: Configure the Image Adjustment (Brightness, Contrast and
sharpness), Exposure (Exposure Time and gain), Backlight, White
Balance and Image Enhancement settings only.
2. Image Adjustment
Brightness, Contrast
Saturation,
Sharpness
Modifies the different elements of picture quality by adjusting the
position of the values for each of parameter.