Interlogix TVB-5301 Configuration Manual - page 30
28
TruVision Series 3 IP Camera FW3.1 Configuration Manual
To define ROI parameters:
1. Click
Configuration
>
Video/Audio
>
ROI
.
2. Draw the region of interest on the image. It supports only one region.
3. Choose the stream type to set the ROI encoding.
4. Check the
Fixed Region
to manually configure the area. You can choose the
Image Quality Enhancing level for ROI encoding, and you can also name the
ROI area.
5. Click
Save
to save changes.
Dual-VCA (Video Content Analysis)
When Dual-VCA mode is enabled, the camera sends video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.
For example, with an Interlogix NVR (please check the Interlogix website for the
latest NVR models supporting this feature) you can draw a virtual line in the NVR
playback window and search the objects or people crossing this virtual line.
Note: Only cross line and intrusion detection can support dual-VCA mode.
To define Dual-VCA parameters:
1. In the
Video/Audio
panel, click the
Display Info. On Stream
tab to open its
window.
2. Check the check box to enable
Dual-VCA
.