Interlogix TVB-5301 Configuration Manual - page 18
16
TruVision Series 3 IP Camera FW3.1 Configuration Manual
Parameters
Description
network storm.
Enable Multicast Discovery: Enables the automatic detection of the online
network camera via private multicast protocol in the LAN.
DNS server: Specifies the preferred and alternate DNS server for your
network.
2.
Port
HTTP Port: The HTTP port is used for remote internet browser access.
Enter the port used for the Internet Explorer (IE) browser. Default value is
80.
RTSP Port: RTSP (Real Time Streaming Protocol) is a network control
protocol designed for use in entertainment and communications systems to
control streaming media servers. Enter the RTSP port value. The default port
number is 554.
HTTPS Port: HTTPS (Hyper Text Transfer Protocol Secure) allows video to
be securely viewed when using a browser. Enter the HTTPS port, value. The
default port number is 443.
Server Port: This is used for remote client software access. Enter the server
port value. The default port number is 8000.
Alarm Server IP: Specifies the IP address of the alarm host.
Alarm Server Port: Specifies the port of the alarm host.
3.
DDNS
DDNS is a service that maps Internet domain names to IP addresses. It is
designed to support dynamic IP addresses, such as those assigned by a
DHCP server.
Specifies DynDNS, and ezDDNS.
DynDNS (Dynamic DNS): Enter the user name and password registered to
the DynDNS web site. The domain name is that of the DynDNS web site.
ezDDNS: Enter the host name. It will automatically register it online.
4.
PPPoE
Retrieves a dynamic IP address.
5.
SNMP
SNMP is a protocol for managing devices on networks. Enable SNMP to get
camera status and parameter related information.
6.
802.1X
When the feature is enabled, the camera data is secured and user
authentication is needed when connecting the camera to the network. See
page 15 for setup information.
7.
QoS
QoS (Quality of Service) can help solve the network delay and network
congestion by configuring the priority of data sending.
Enable the option in order to solve network delay and network congestion by
configuring the priority of data sending.
8.
FTP
Enter the FTP address and folder to which snapshots of the camera can be
uploaded.
6.
UPnP
The UPnP (Universal Plug and Play) protocol allows devices to connect
seamlessly and to simplify the implementation of networks in the home and
corporate environments. With the function enabled, you do not need to
configure the port mapping for each port, and the camera is connected to the
Wide Area Network (WAN) via the router.
Enable and set the friendly name detected.
7.
Specifies the email address to which messages are sent when an alarm
occurs.