Interlogix TVB-5301 Configuration Manual - page 16
14
TruVision Series 3 IP Camera FW3.1 Configuration Manual
2. From the
Time Zone
drop-down menu select the time zone that is the closest
to the camera’s location.
3. Under
Time Sync
, check one of the options for setting the time and date:
Synchronize with an NTP server: Check the
NTP
enable box and enter the
server NTP address. The time interval can be set from 1 to 10080 minutes.
- Or -
Set manually: Enable the
Manual Time Sync.
function and then click
to
set the system time from the pop-up calendar.
Note: You can also check the
Sync with computer time
check box to
synchronize the time of the camera with the time of your computer.
4. Check
Enable DST
to enable the DST function, and set the date of the DST
period.
5. Click
Save
to save changes.