Interlogix TVB-2203 Installation Manual - Programming
8 Installation Guide
Programming
The camera can be programmed using OSD menus.
Once the camera hardware has been installed, you
configure the camera by using a TVS-C200 controller
(purchase separately).
The Setup menu provides access to the camera
configuration options. Please refer to the configuration
manual for further information on setting up the
camera. See page 9 for the setup menu.
Program the camera by attaching a standard video
monitor to the system.
To access the Setup menu:
1. Press the OSD control button (Enter) to access
the Main menu and its submenus.
2. Push the button up, down, left and right to move
between menu options.
3. Press the OSD control button to select an option.
4. When in a submenu, select
Return
to return to
the previous menu.
5. To exit the Main menu, move the cursor to
Exit
at
the bottom of the screen and press
Enter
. All
changes are saved.