Interlogix NX-1815E User Manual - page 22
22
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
7.
[1]
Selects AM time.
8.
[2]
To configure the date.
9. [19]-[ENTER] Enter
the current day, i.e., 19th.
10.
[6] - [ENTER]
Enter the current month, i.e., June (sixth month.)
11.
[2009] [ENTER] Enter the current year, must be 4 digits, i.e., year 2009.
12.
[MENU]
Moves back to basic system configuration menu selection (step 2).
13.
[MENU]
Exits back to main menu.
14.
[MENU]
Press menu to exit
How to: Adjust partition entry or exit times
Step Example:
Adjust entry or exit times
1.
[MENU] - [9] Selects main menu - Option 9, Basic system configuration.
2.
[?]
[2] Selects partition entry time, [3] Selects partition exit time.
3. [?]-[?]-[?]-[?]
Enter
your Master user pin code.
4.
[1]
Select the partition number you wish to adjust.
5.
[?] [ENTER] Enter the new entry / exit time in seconds (1 – 255 seconds).
6.
[MENU]
Moves back to step 4, partition selection.
7.
[MENU]
Moves back to basic system configuration menu selection (step 2).
8.
[MENU]
Exits back to main menu.
9.
[MENU]
Press menu to exit.
How to: Adjust keypad LED intensity
Step Example:
Set keypad led intensity
1.
[MENU] - [9] Selects main menu - Option 9, Basic system configuration.
2.
[4]
Selects keypad LED intensity.
3. [?]-[?]-[?]-[?]
Enter
your Master user pin code.
4. [?]
1 = Display run mode led intensity
2 = Display idle mode led intensity
3 = Backlight run mode led intensity
4 = Backlight idle mode led intensity
5 = Logo On / Off
5.
[?]
Select LED intensity from 1-8.
6.
[MENU]
Moves back to step 4, Run mode / Idle mode selection.
7.
[MENU]
Moves back to basic system configuration menu selection (step 2).
8.
[MENU]
Exits back to main menu.
9.
[MENU]
Press menu to exit.