1 instruction manual hum-20a-eu hum-20a-gb cool & warm mist ultrasonic humidifier ib-hum-20a-1212-02_layout 1 04/12/2012 12:09 page 1.
3 g b read all instructions before use. Save these instructions for future reference. Important safeguards: when using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: • always unplug the appliance from the electr...
4 gb safety cautions : please read this section carefully before using the appliance. • do not use while bathing or in shower. • keep dry – do not operate in a wet or moist condition. • do not use water above 30˚c. • use this appliance only for its intended use as described in this manual. • always ...
5 g b unique features and specifications: ultrasonic technology this humidifier uses ultrasonic high frequency technology to convert the water into particles that are dispersed into the air evenly. These particles then combine with the ions generated by the humidifier to moisten the air. Digital hum...
Instructions for use: 1. Plug the unit into a 220-240 ac power supply. Press the power button to start the unit. A green indicator light will be on. Press again to turn off. When the indicator turns red, the water tanks need refilling (fig. 2). 2. Setting the timer: a. Press the timer + or – button ...
7 g b how to fill caution: before filling unit with water, turn power off and unplug unit from outlet. 1. Grasp tank handles with both hands and lift up from humidifier base (fig.3). 2. Turn the tank upside down—remove the tank cap by turning it counter-clockwise (fig.4). 3. Fill the water tank with...
Uv bulb replacement 1. Turn power off and unplug humidifier from the outlet. 2. Remove water tanks and empty all water from the main unit. 3. Remove the two (2) screws from the uv light cover on the bottom of the unit using a phillips screwdriver (not included). 4. Carefully pull out the uv holder a...
9 g b troubleshooting problem possible cause solution power light is off • unit is not plugged in • no power at unit • plug unit in • press the power button to turn the power on • check circuits, fuses, try a different outlet peculiar odor • if new unit • if unit is in use, the odor may be a dirty t...
Ib-hum-20a-1212-02 ib-hum-20a-1212-02_layout 1 04/12/2012 12:15 page 108.
