HoMedics BPW-030-0GB Instruction manual - page 7
13
1. Press the User-Switching key to select Memory Zone 1 or Memory
Zone 2.
2. Place the cuff on the wrist. Press the ON/OFF/START key
. All
digits will light up, checking the display functions. The checking
procedure will be completed after about 2 seconds.
3. After all symbols appear, the
display will show a blinking
“0”. The monitor is “Ready
to Measure” and will
automatically inflate the cuff
to start measurement.
12
MEASUREMENT PROCEDURE
IMPORTANT NOTES:
• Position the monitor at the same level as your heart during
measurement to ensure accurate readings.
• Blood pressure changes with every heartbeat and is in constant
fluctuation throughout the day.
• Blood pressure measurement can be affected by the position of
the user, his or her physiologic condition and other factors. For
greatest accuracy, wait 1 hour after exercising, bathing, eating,
drinking beverages with alcohol or caffeine, or smoking to measure
blood pressure.
• Before measurement, it is suggested that you sit quietly for 15
minutes as measurements taken during a relaxed state will have
greater accuracy. You should not be physically tired or exhausted
while taking a measurement.
• During the measurement, do not talk or move your arm or
hand muscles.
• See page 18 for additional notes regarding your blood pressure
measurement.
OR