Holman MK21015 Instruction Manual - page 9
Work out the spacing of the misting jets and cut the misting hose to length and
install the relevant misting tees. Finish each line with a misting elbow.
(3 x Misting Elbows are included in this System to enable installation of a single
or multiple line misting solution. More Misting Elbows are available at your
nearest HOLMAN stockist Product Code: MS20003)
Use the hose clamps to attach the misting hose to the wall or beams.
The Holman hose clamps use a very strong masonry nail that should not bend
when you hammer it into timber or masonry.
HINT 1: Run pipework along mortar joints in brickwork.
Hammer the hose clamps into the mortar for a reliable result.
HINT 2: Use a hose clamp on each side of a misting tee to ensure
the tee is firmly positioned and misting in the correct direction.
Misting System Assembly & Installation
Misting System Assembly & Installation
7
Position Hose Clamps
7-8cm away from
Nozzle
(Hose Clamp)
(Hose Clamp)
(Misting Jet)
2014-Misting System Deluxe Instruction Manual V2.indd 9
7/08/2014 4:36:11 PM