Fargo C50 Service Manual - page 47
C50 Card Printer Service Manual PLT-01278 rev 1.1
August 2013
Page 47
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
Step Procedure
4
Replace with the new sensor.
Line up the sensor and push down to snap it in place UNDER the small tab.
Route the cable on the right side of the frame as shown in the picture below.
Connect to the mainboard
Reverse assembly to complete the procedure.