D-Link DSL-560I User Manual - page 34
DSL-560I ADSL Router User’s Guide
Figure 5 - 2. Multiple PVC Menu
In order to use additional PVCs, each profile must have a unique (to the Router) Item Name and a unique
VCI/VCI combination. You may use any available Encapsulation or connection type. Follow the instructions on
the next page to set up multiple PVCs.
To add a PVC:
1. Type in a new VPI and VCI value. This combination may not be used for another PVC profile on the
Router.
2. Select
the
Encapsulation method used for the new PVC.
3. For PPP connections (PPPoE or PPPoA), you must supply a new User Name and Password. You may
use the same user name/password combination for more than one PVC unless you are specifically told
not to do this by your service provider. It is recommended however that a different combination be used
whenever it is practical. Also for PPP connections, select the Authentication and Idle Time settings
(see Table 5 - 1. WAN Connection Configuration).
4. Click
the
Add button when you have entered all the information. The web browser will briefly go blank.
After a few seconds the new PVC profile appears listed in the Current ATM PVC List at the bottom of
the web page.
.
To modify an existing PVC:
1. Select the PVC profile you want to change by clicking on the item in the Current ATM PVC List.
2. Change the settings as desired making sure not to duplicate a VPI/VCI setting.
24