D-Link DSL-560I User Manual - page 32
DSL-560I ADSL Router User’s Guide
Configuring the WAN Connection
Use the WAN Setup menu to configure the WAN interface for PVC settings and other settings used to configure
the ADSL connection and the connection to the service provider’s network. Use this menu to add, change or
delete PVC connection profiles if you have a multiple PVC account.
Figure 5 - 1. WAN Configuration
The Router may be configured to use common Encapsulation and connection methods commonly used for
ADSL service. The information that is needed for the different method varies according to connection type.
Therefore the menu will change to offer different settings depending on whether the connection is a PPP or
Bridged connection type.
To configure a single PVC profile, select the Encapsulation setting first. This may change the user configurable
variables that are offered. The default Encapsulation used is RFC1483 Bridged. Table 5 - 1. WAN Connection
Configuration on the next page lists the configuration settings for the different Encapsulation types.
22