D-Link DPR-1260 - RangeBooster G Multifunction Print Server Quick Install Manual - D-Link Setup Wizard
D-Link DPR-160 Quick Install Guide
D-Link Setup Wizard
Once you have successfully configured the wireless settings, you
are now ready to setup your network printer. You can disconnect
the Ethernet cable and configure the printer from a wireless
connection.
Note: You will need to run this wizard from each computer that wishes
to use the printer.
To access the configuration utility, double-click on the
My Network
Places icon on your desktop and then double-click on “DPR-1260:
dlink-xxxxxx”.
Windows
®
2000 users can open a web browser and enter
http://dlink-xxxxxx (where xxxxxx is the last 6 characters of the print
server’s MAC address).
If you get a
Page Cannot be Displayed error, please refer to the
Troubleshooting section of the manual for assistance.
From the Status screen, click on the
Setup tab, and then click Next
to start the wizard.