D-Link DPR-1260 - RangeBooster G Multifunction Print Server Quick Install Manual - Wep Encryption
D-Link DPR-160 Quick Install Guide
WEP Encryption
It is recommended to enable encryption on your wireless router before
your wireless print server. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when
enabling encryption due to the added overhead.
1.
Log into the web-based
configuration (refer to page
5). Click on
Setup and then
Wireless Settings on the
left side.
2. Next to Security Mode,
select
WEP.
3. Next to Authentication,
select
Shared Key.
4. Select either
64-bit or 128-bit encryption from the drop-down
menu next to WEP Encryption.
5. Next to Key 1, enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices. You may enter
up to 4 different keys.
6. Click
Save Settings to save your settings.