D-Link DGS-3000-10TC Hardware Installation Manual - page 42
DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide
34
RPS
Green
Solid Light
RPS is connected and the RPS switch is
turned on.
Light off
RPS is not connected or the RPS switch is
turned off.
Fan Err
Red
Blinking
When any of the fans has failed.
Light off
When all fans work normally.
LED Per
10/100/1000 Mbps
Port
Link/Act/Speed
Mode
Green
Solid Light
When there is a secure connection (or link)
to 1000Mbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 1000Mbps.
Orange
Solid Light
When there is a secure connection (or link)
to 10/100Mbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 10/100Mbps.
Off
Light off
No link.
LED Per SFP Port Link/Act
Green
Solid Light
When there is a secure connection (or link)
to 1000Mbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 1000Mbps.
Orange
Solid Light
When there is a secure connection (or link)
to 100Mbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 100Mbps.
Off
Light off
No link.
LED Per SFP+
Port
Link/Act
Green
Solid Light
When there is a secure connection (or link)
to 10Gbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 10Gbps.
Orange
Solid Light
When there is a secure connection (or link)
to 1Gbps Ethernet device at any of the
ports.
Blinking
When there is reception or transmission of
data occurring at 1Gbps.
Off
Light off
No link.