Califone WS-series User Manual - 5. Basic Operation
califone.com
9
2. Decrease the volume to minimum on the WS-R.
3. Connect the headphones to the PHONE jack.
4. Increase the volume on the WS-R to the desired listening level.
5. To enable the 85 dB SPL limiter, switch the 85dB LIMITER switch
on the back of the unit to the ON position. The LCD should
display the “85 dB” indicator to indicate it’s enabled.
CAUTION: Avoid excessive volume for long periods of time as
this can result in hearing damage.
CAUTION: The 85 dB SPL Limiter will only work with
headphones/headsets specifically sold by Califone for use with
the WS-series products. Check with Califone to see if your
heaphone/headset is compatible with this feature.
5. BASIC OPERATION
5.1 WS-T OPERATION
TRANSMITTER POWER
The transmitter power of the WS-T can be adjusted using the
TX Power switch on the back of the unit. If there is interference
from other devices, the switch may be adjusted to the HIGH or LOW
setting. Switch between the settings to achieve the desired range
and audio quality.
NOTE: Due to FCC regulations, only the LOW setting should be
used in the USA.
WALKIE-TALKIE FUNCTION
The transmitter may also function as a walkie-talkie. On the
back of the unit, switch the walkie-talkie setting to ON. Then, press
the side button while speaking to transmit sound. Audio will only be
transmitted while the walkie-talkie button is pressed.
5.2 WS-R OPERATION
SENSITIVITY
The sensitivity of the WS-R can be adjusted using the sensitivity
switch on the back of the unit. If there is interference from other
devices, the switch may be adjusted to the HIGH or LOW
setting. Switch between the settings to achieve the desired range
and audio quality.