Bissell 1315 SERIES User Manual - page 7
www.BISSELL.ca
7
Mainte nan ce & Care
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
Emptying the dirt cup
Dirt cup should be emptied before debris
reaches the FULL line on cup.
1. Turn power OFF and remove hand vacuum
from unit by pulling the hand vacuum directly
out of the unit.
2. Hold hand vacuum vertically and depress the
release button to release dirt cup.
3. Grasp filter tabs and pull vertically to remove
filter cup and empty dirt into waste container.
4. Replace filter back into the dirt cup and
attach dirt cup to hand vacuum until it snaps
securely in place.
Cleaning or replacing the filter
The key to maximum performance is having a
clean filter. Cleaning the filter after each use will
help your vacuum operate at peak efficiency.
Use only genuine BISSELL model number 1313 &
1315 replacement filters in your BISSELL vacuum.
To purchase visit www.BISSELL.ca or call
1-800-263-2535.
To clean filter:
1. Turn power OFF.
2. Remove the dirt cup from the hand vacuum,
as directed in step 1 “Emptying the dirt cup”.
3. Remove filter cup assembly by pulling out of
dirt cup. Then twist cloth filter out by twisting
counterclockwise. Tap filters against waste
basket removing any visible dirt.
4. Replace filter back into the washable filter cup
then turn clockwise to lock into place.
5. Attach washable filter cup back into the dirt
cup and attach to hand vacuum until it snaps
securely in place.
NOTE: After heavy usage, you may clean the
filter and filter cup by washing it gently by
hand in warm water and mild dish detergent.
Rinse thoroughly and make certain it is
completely dry before replacing it.
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect plug from electrical outlet before perform-
ing maintenance or troubleshooting checks.
3.
2.
Release Button
3.