Audio Analogue Crescendo Owner's Manual - page 15
15
in tale locazione non è stata memorizzata alcuna stazione radio viene visualizzata sul display la scritta “EMPTY”, altrimenti viene
visualizzata la frequenza della stazione memorizzata e, se disponibile, il relativo messaggio RDS indicante il Name Station.
3.
Premendo e rilasciando i tasti MEM+ e MEM- sul telecomando oppure i tasti MEMORY▲ e MEMORY▼sul pannello frontale, scorrere
le varie locazioni di memoria e fermarsi nella posizione dove si intende memorizzare la stazione radio, oppure è possibile selezionare
direttamente la posizione utilizzando i tasti numerici del telecomando. Per ogni locazione il display indicherà, oltre al numero della
locazione, l’indicazione EMPTY se nella locazione non è stata memorizzata alcuna stazione o la frequenza e l’eventuale messaggio
RDS (se disponibile ) della stazione memorizzata.
4.
Premere e rilasciare il tasto STORE sul telecomando o il tasto STORE sul frontale, per memorizzare la stazione nella locazione
selezionata e uscire dalla modalità “memorizzazione”; a questo punto sul display il numero della locazione memorizzata lampeggerà per
alcuni secondi e successivamente verrà visualizzato il messaggio “Stored”, ad indicare l’avvenuta procedura di memorizzazione
ritornando alla normale esecuzione di funzionamento.
RADIO STATION SELECTION
It is possible to quickly jump from stored station to another by pressing the MEMORY▲/ MEMORY▼ buttons on the front panel of the unit or the
MEM+/MEM- buttons on the remote controller. When the unit is in AM mode it is possible to jump from one of the 18 AM stored radio station to the
other: the same thing is possible for FM radio station when the unit is in FM mode. When the unit is turned on or the AM/FM button on the front
panel of the unit or on the remote controller is pressed, the unit will be automatically tuned to the first radio station of the selected mode. It is
possible to select the memory allocations by pressing the MEMORY▲/MEMORY▼ buttons on the front panel of the unit or the MEM+/MEM-
buttons on the remote controller. If the memory allocation is empty, an EMPTY message is shown on the display and the unit goes back to the
previously selected frequency.
SINTONIA DELLE STAZIONI RADIO MEMORIZZATE
E’ possibile accedere velocemente alle stazioni radio memorizzate mediante l’uso dei pulsanti MEMORY▲ e MEMORY▼ sul frontale o premendo
i tasti MEM+, MEM- sul telecomando. In modalità AM si possono sintonizzare le stazioni radio AM memorizzate nelle 18 locazioni di memoria
riservate alla AM e analogamente per la modalità FM. Alla accensione o in seguito ad una pressione e rilascio del pulsante AM/FM sul frontale o
alla pressione del tasto AM/FM del telecomando, l’accesso alla memoria ripartirà dalla prima locazione della banda selezionata. Mediante i pulsanti
MEMORY▲, MEMORY▼sul frontale o i tasti MEM+, MEM- sul telecomando sarà possibile selezionare le varie locazioni di memoria. Se la
locazione di memoria selezionata risulta vuota, il display mostrerà la scritta “EMPTY” e l’apparecchio sintonizzerà nuovamente la frequenza
presente prima della selezione della locazione.
DESCRIPTION OF THE INFORMATION SHOWN ON THE DISPLAY:
The information shown on the display depends on the mode the unit is working on.
DESCRIZIONE DELLE INFORMAZIONI MOSTRATE SUL DISPLAY:
Le informazioni mostrate sul display dipendono dalla modalità di funzionamento.
TUNER Mode:
Modalità TUNER
:
USBDAC Mode:
Modalità USBDAC:
(*) The command is sent by pushing a button on the remote control or a switch on the front, which is displayed for a while on the display and then
disappears. The command can be or not be executed by the player running on the PC/MAC depending on the player used.
(*) Il comando inviato premendo un tasto sul telecomando o un tasto sul frontale viene visualizzato per qualche secondo sul display. Tale comando
può essere o non essere eseguito dal player in esecuzione sul PC/MAC a seconda del Player che si utilizza.
101.20 FM T S
RTL102.5
It indicates that the incoming signal is stereophonic.
Indica che il segnale in arrivo è stereofonico
It indicates that there is a radio station on the selected frequency
Indica che alla frequenza sintonizzata è presente una stazione radio
Modulation (AM or FM)
Modulazione (AM o FM)
RDS message
Messaggio RDS
Frequency
Frequenza
USB DAC MODE
PLAY
USB DAC MODE
It shows the command (*)
Visualizza il comando (*)