AUDAC IME01 User Manual - Chapter 4
18
Chapter 4
Connecting
Using the HDMI (ARC) socket
The ARC (Audio Return Channel) function allows you
to send audio from your ARC compliant TV to your
sound bar through a single HDMI link. To enjoy the
ARC function, please ensure your TV is both HDMI
CEC and ARC compliant and set up accordingly.
When correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/- and
MUTE) of the sound bar. - Connect the HDMI cable
(not included) from unit’s HDMI (ARC) socket to the
HDMI (ARC) socket on your ARC compliant TV.
Then press the remote control to select HDMI ARC mode.
NOTE
• Your TV must support the HDMI-CEC and ARC and the HDMI-CEC and ARC
must be set to On.
• The setting method of HDMI-CEC and ARC may differ depending on the TV. For
details about ARC function, please refer to the owner’s manual.
• Ensure that you use an HDMI cables that can support the ARC function.
• HDMI-CEC will be called different names by various manufacturers – please refer
to your owner’s manual for details on setting up HDMI-CEC and ARC.
Using the optical socket
The optical socket allows connection of the sound
bar to the optical output of your TV or receiver.
Simply connect using an optical (Toslink) cable.
Remove the protective cap before connecting.
SE RV ICE ON LY
HDMI AR C
OPTICAL
COAXIAL
AUX
SE RV ICE ON LY
HDMI AR C
OPTICAL
COAXIAL
AUX
SE RV ICE ON LY
HDMI AR C
OPTICAL
COAXIAL
AUX